manualshive.com logo in svg

KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию, Страница: 115 / 288

Поделиться
Скачать
KAESER M135 SIGMA CONTROL MOBIL Скачать руководство пользователя страница 115

10.4.1  Radiator maintenance

Material Coolant

Coolant tester
Receptacle
Drain hose
Funnel
Cleaning cloths

Precondition The machine is shut down.

The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 bar.
Machine cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.

WARNING

Danger of scalding by hot coolant!

Serious injuries can be caused by hot coolant.
➤ Allow the machine to cool down before opening the enclosure.

CAUTION

There is danger of injury from coolant containing antifreeze!
➤ Avoid eye and skin contact with coolant. If the eyes are affected, rinse immediately with running

water.

➤ Wear protective glasses and gloves.

CAUTION

Insufficient coolant can damage the engine.

Insufficient coolant will cause the engine to overheat. Overheating can cause serious damage to the

engine.
➤ Check the coolant level daily.
➤ Top up the coolant as necessary.

10.4.1.1 Checking coolant level

Check the coolant level of the engine daily before starting.
The level is checked on the coolant expansion tank.

■ The tank is semi-transparent so the coolant level can be seen from outside.
■ The level should be between the minimum and maximum markings with the engine cooled down.

10 Maintenance

10.4 Engine

No.: 9_6975 00 E

Service Manual    Screw Compressor  
M135  SIGMA CONTROL MOBIL

103

Содержание M135 SIGMA CONTROL MOBIL

































































































































































































































































































Отзывы:

Нет отзывов