manualshive.com logo in svg

KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию, Страница: 28 / 288

Поделиться
Скачать
KAESER M135 SIGMA CONTROL MOBIL Скачать руководство пользователя страница 28

3  Safety and Responsibility

3.1  Basic Information

The machine is manufactured to the latest engineering standards and acknowledged safety regula‐

tions. Nevertheless, dangers can arise through its operation:
■ danger to life and limb of the operator or third parties,
■ impairments to the machine and other material assets.

DANGER

Disregard of these instructions can result in serious injury.
➤ Read the service manual carefully and take note of the contents for safe machine operation.

➤ Use this machine only if it is in a technically perfect condition and only for the purpose for which

it is intended; observe all safety measures and the instructions in the service manual.

➤ Immediately rectify (have rectified) any faults that could be detrimental to safety.

3.2  Specified use

The machine is intended solely for generating compressed air for industrial use. An optional electric

generator is available to generate electric power for individual consumers.

Any other use is considered incorrect. The manufacturer is not liable for any damages that may result

from incorrect use. The user alone is liable for any risks incurred.
➤ Keep to the specifications listed in this service manual.
➤ Operate the machine only within its performance limits and under the permitted ambient condi‐

tions.

➤ Do not use compressed air for breathing purposes unless it is specifically treated.
➤ Do not use compressed for any application that will bring it into direct contact with foodstuffs

unless it is specifically treated.

3.3  Improper Use

➤ Never direct compressed air at persons or animals.
➤ Do not use untreated compressed air for breathing purposes.
➤ Do not allow the machine to breath in toxic, acidic, flammable of explosive gases or vapours.
➤ Do not operate the machine in areas in which specific requirements with regard to explosion

protection are in force.

3.4  User's Responsibilities

3.4.1  Observe statutory and universally accepted regulations.

These are, for example, nationally applied European directives and/or valid national legislation, safety

and accident prevention regulations.
➤ Observe relevant statutory and accepted regulations during operation, transporting and mainte‐

nance of the machine.

3

Safety and Responsibility

3.1

Basic Information

16

Service Manual    Screw Compressor  
M135  SIGMA CONTROL MOBIL

No.: 9_6975 00 E

Содержание M135 SIGMA CONTROL MOBIL

































































































































































































































































































Отзывы:

Нет отзывов