manualshive.com logo in svg

KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию, Страница: 34 / 288

Поделиться
Скачать
KAESER M135 SIGMA CONTROL MOBIL Скачать руководство пользователя страница 34

➤ Do not operate in areas in which specific requirements regarding explosion protection are in force.

For instance, the requirements of the ATEX directive 94/9/EC "Equipment and Protective Sys‐

tems for use in Explosive Atmospheres".

➤ Ensure adequate ventilation.
➤ Ensure that required ambient conditions are maintained with regard to:

■ Ambient temperature
■ Clean inlet air with no damaging contaminants
■ Inlet air free of explosive or chemically unstable gases or vapours
■ Inlet air free of exhaust gasses from internal combustion engines
■ Inlet air free of acid/alkaline forming substances, particularly ammonia, chlorine or hydrogen

sulphide.

➤ Do not position the machine in warm cooling outlet air from other machines.
➤ Ensure accessibility so that all work on the machine can be carried out without danger or hin‐

drance.

➤ Chock the wheels to prevent unwanted movement.
➤ Do not place additional loads on the machine (e.g. excavator bucket as anti-theft measure).

Operation

➤ Keep the access doors closed for safety, quiet running and to ensure correct cooling air flow.
➤ Carry out regular inspections:

■ for visible damage and leakage,
■ of safety devices,
■ of components needing to be monitored.

➤ Never operate machines without an air filter when drawing in air from the surroundings.

Maintenance

➤ Make sure the machine is shut down, cooled down and pressure-free before commencing any

maintenance work.

➤ Wear close-fitting, flame-resistant clothing. Wear protective clothing as necessary.
➤ Do not leave any loose components, tools or cleaning rags on or in the machine.
➤ Components removed from the machine may still be a source of danger.

Do not open or destroy components removed from the machine as some, inlet valves, for in‐

stance, are powerfully spring-loaded.

De-commissioning, storage and disposal

➤ Drain out fluids and dispose of according to environmental regulations.

These include, for example, fuel, engine oil and compressor cooling oil and engine coolant.

➤ Dispose of the machine in accordance with local environmental regulations.

3.5.3  Organisational Measures

➤ Designate personnel and their responsibilities.
➤ Give clear instructions on reporting faults and damage to the machine.
➤ Give instructions on fire reporting and fire-fighting measures.

3

Safety and Responsibility

3.5

Dangers

22

Service Manual    Screw Compressor  
M135  SIGMA CONTROL MOBIL

No.: 9_6975 00 E

Содержание M135 SIGMA CONTROL MOBIL

































































































































































































































































































Отзывы:

Нет отзывов