Kaba Peaks Classic Скачать руководство пользователя страница 40

Страница: 40 / 92

Section 2 - 28

For specification purposes, 6-pin Peaks products have seven active pin stacks and 7-pin Peaks products have

eight active pin stacks. Texts of product specifications are available upon request.

Mechanical Testing

Testing of 8900/6800 series cores has proven them to be superior to the 8800/3800 series cores. The modern

alloys used in the shells and sleeves of the 8900/6800 series have remarkable bearing properties. In addition,

Kaba employs a patented two step process of plating and cladding on all 8900/6800 and 8400/3400 sleeves and

shells that makes the surfaces of these components harder than conventional brass surfaces. Plugs for both

8900/6800 and 8800/3800 series are made of brass because of its machinability.

Peaks cores and cylinders exceed 500,000 cycles with no measurable wear on shells and sleeves. Keys, key-

ways and bottom pins show normal wear. When 8900/6800 series cores are cut open, tool marks remain visible in

the pin chambers.

Pull tests have been successfully completed on Peaks cores in Arrow, Best, KSP, Corbin Russwin and Yale hous-

ings. The 8900/6800 cores actually require more force than 8800/3800 series cores. This is due to the behavioral

characteristics of the metals. All brass tends to shear, while the alloys employed in the 8900/6800 tend to distend

but hold.

Environmental testing

The standard ASTM B117 salt spray (corrosion) test for trim is 200 hours. After over 300 hours, both control and

operating keys work in Peaks cores, even before lubrication. After lubrication, the cores feel like new. Chrome fin-

ish cores do not discolor. Brass finish cores may darken with exposure to the elements.

Product in development, warranty and updates

The catalog indicates current product availability. Product is always under development. Contact Kaba Access

Control about retrofits not currently shown. The last page of the catalog is a one page summary of pinning com-

ponents. Warranty and return policies are in the catalog.

Non-original pins will not work properly in Kaba

products and their use voids product warranty.

Product Specification and Testing Data

Содержание Peaks Classic





























































































Результаты поиска

Содержание Peaks Classic

Отзывы:

Похожие инструкции для Peaks Classic

Бренды по названию

Популярные бренды

Kaba Peaks Classic, Техническое руководство

Результаты поиска

Содержание Peaks Classic

Отзывы:

Похожие инструкции для Peaks Classic

Бренды по названию

Популярные бренды