[Time] Page
This page sets the current clock time.
This page can be used during access using
“admin”.
0
Press the [OK] button to enable the new
settings.
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
Memo :
0
The time of the internal clock may be
significantly out of alignment if the power of the
product is turned off for a long time or when there
is prolonged power failure. If this occurs,
readjust the [Time] setting.
Settings
.
* Setting values with
R
are default values.
SNTP
Sets the SNTP client function.
ON:
Gets the time by periodically accessing the
specified NTP server.
OFF:
Does not access the NTP server.
[Set values:
R
OFF, ON]
Memo :
0
The time is recorded in the JPEG header and
H.264 header distributed by the camera. The
time recorded in the JPEG header and H.264
header may be discontinuous immediately
before and after acquiring the time from the NTP
server.
SNTP Server
Sets an IP address of NTP server.
[Factory default: 0.0.0.0]
Interval
Sets a unit and values of measurement for the time
interval at which to access the NTP server.
[Set values: Min(1-60),
R
Hour(1-24), Day(1-31)]
Time
Displays the clock time of camera.
You can correct the time by entering a value
(without seconds).
Memo :
0
The time is recorded in the JPEG header and
H.264 header distributed by the camera.
Discontinuity may occur in the time of the JPEG
header and H.264 header immediately before
and after changing the time.
0
Change the [Time] if it does not coincide with the
[Time Zone] of the region you are residing.
Time Zone
Sets a time zone.
[Set values: (GMT-12:00) to
R
(GMT)UTC to (GMT
+12:45)]
Memo :
0
After changing the [Time Zone], check to ensure
that the [Time] is correct. If it is incorrect, readjust
the [Time] accordingly.
Note :
0
When the [Time Zone] settings are changed to
a value different from the factory default, they
cannot be restored to the factory settings even
by initializing using [All Settings] on the
[Maintenance] page.
PC Time to Camera
Click [Set] to set the computer’s time on the
camera.
[Advanced Settings] Page -[Time] Page
65
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
