JVC VN-H657U, Инструкция по эксплуатации

Страница: 53 / 98

Constant
Settings for performing constant recording.
9 Encoder
For selecting the encoder for performing constant
recording.
Memo :
0
You can select a JPEG encoder number.
9 Interval
For setting the recording interval in seconds.
[Set values:
R
1 to 65535] seconds
9
File Naming
Three types of recording file names are available
for selection.
0
“Auto”:
Generated from the year/month/day/hour/
minute/second, and number.
Example: 20121114161032-001-2.jpg
0
“Manual1”:
Year, month, day, hour, minute, second, and
number are added to [User-Defined-String] in
the file name.
Example: Camera1_20121114161032001.jpg
0
“Manual2”:
File name contains only the character string
entered in [User-Defined-String]
Example: Camera1.jpg
[Set values:
R
Auto, Manual1, Manual2]
9 Sunday to Saturday
For selecting whether to activate or stop recording
by day of the week.
[Set values:
R
Unmask All, Mask All, Unmask
Span, Mask Span]
0
For setting the time period when “Unmask
Span” or “Mask Span” is selected.
[Set values: 00H00M to 24H00M]
Alarm
Settings for performing alarm recording.
9 Encoder
For setting the encoder for performing alarm
recording, and the JPEG frame rate.
[Set values: 30 fps, 15 fps, 10 fps, 7.5 fps,
R
5 fps,
3 fps, 2 fps, 1 fps]
Memo :
0
You can select a JPEG encoder number.
0
The settable frame rate varies with the encoder
setting.
9 Trigger1, Interval, Trigger2
0
Trigger1:
Select the 1st trigger to perform an action.
[Set values:
R
Pin Input1 Make, Pin Input2 Make,
Pin Input1 Break, Pin Input2 Break, Position,
Motion Detection, Tampering Detection, Time,
FAN Stop]
0
Interval:
Specify the maximum interval between each
trigger for [Trigger1] and [Trigger2].
[Set values: 1 to 3600]
0
Trigger2:
Select the 2nd trigger to perform an action.
[Set values:
R
Disable, Pin Input1 Make, Pin
Input1 Break, Pin Input2 Make, Pin Input2
Break]
9
Position Number
Displayed when “Position” is selected in [Trigger1].
Executes an action upon moving to the entered
preset position.
[Set values: 0 to 99]
Memo :
0
Specify the setting for Preset Position in [PTZ
Settings] of Built-in Viewer.
(
A
P78 [ [PTZ Settings] ] )
9 Time
Displayed when “Time” is selected in [Trigger1].
Executes an action at the time you have entered.
[Set values: 00H00M to 23H59M]
9
Pre-Trigger
For setting the FTP pre-recording trigger time
(recording time before alarm input) in seconds.
[Set values: 0 to
R
5 to 60]sec
9 Post-Trigger
For setting the FTP post-recording trigger time
(recording time after alarm input) in seconds.
[Set values: 0 to
R
5 to 60]sec
9 Sunday to Saturday
For selecting whether to activate or stop recording
by day of the week.
[Set values:
R
Unmask All, Mask All, Unmask
Span, Mask Span]
0
For setting the time period when “Unmask
Span” or “Mask Span” is selected.
[Set values: 00H00M to 24H00M]
[Advanced Settings] Page -[FTP Recording] Page
53
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er