1st Trigger
Select the 1st trigger to perform an action.
[Set values:
R
Pin Input1 Make, Pin Input1 Break,
Pin Input2 Make, Pin Input2 Break, Position,
Motion Detection, Tampering Detection, Time,
FAN Stop]
Memo :
0
If you set the [2nd Trigger] to “Disable”, an action
will be performed when only [1st Trigger] is
triggered.
0
[Max. Interval] and [2nd Trigger] can be selected
only when input terminal (“Pin Input1 Make”, “Pin
Input1 Break”, “Pin Input2 Make”, or “Pin Input2
Break”) is selected for the [1st Trigger] trigger.
Max. Interval
This is available when both [1st Trigger] and [2nd
Trigger] are set.
Specify the maximum interval between each
trigger for [1st Trigger] and [2nd Trigger].
An action will be performed if [2nd Trigger] occurs
within the maximum time interval after [1st
Trigger] occurs.
[Set values: 1
sec to 3600
sec]
2nd Trigger
Select the 2nd trigger to perform an action.
[Set values:
R
Disable, Pin Input1 Make, Pin Input1
Break, Pin Input2 Make, Pin Input2 Break]
0
Mail Settings:
If you have set the [SMTP Server], [Port
Number], and [Send Mail Address] on the [Alarm
Environment] page, the “Preset” message is
shown. If not set, the “Unset” message is shown.
P50 [[Alarm Environment] Page] )
0
Mail Address:
Enter the recipient’s mail address.
0
Mail Text:
Enter the mail text. Input not more than 127
characters.
0
JPEG Attachment:
Specify whether or not to attach an image file to
the mail. To attach JPEG images, check the
Attach box and select the transmission channel.
0
Encoder:
Specifies an Encoder No. for encoding of
attached JPEG files.
Memo :
0
You cannot select [JPEG Attachment] if there is
no channel with Encode set to JPEG.
TCP
0
TCP IP Address:
Enter the IP address or FQDN of the destination
of TCP notification.
0
TCP Port Number:
Enter the port number of the destination of TCP
notification. (1 to 65535)
0
TCP Data:
Enter a character string to be sent for TCP
notification. Input not more than 127 characters.
0
JPEG Attachment:
Specify whether or not to attach an image file to
the mail. To attach JPEG images, check the
Attach box and select the transmission channel.
0
Encoder:
Specifies an Encoder No. for encoding of
attached JPEG files.
Memo :
0
You cannot select [JPEG Attachment] if there is
no channel with Encode set to JPEG.
UDP
0
UDP IP Address:
Enter the IP address or FQDN of the destination
of UDP notification.
0
UDP Port Number:
Enter the port number of the destination of UDP
notification. (1 to 65535)
0
UDP Data:
Enter a character string to be sent for UDP
notification. Input not more than 127 characters.
Switch Scene File
0
Scene File:
Select the scene file to change. For details of the
scene file, see the [Camera] page.
[Set values:
R
General, Indoor, Outdoor,
ActiveGamma, Traffic, DataSaving, Day(Color),
Night(B&W)]
[Advanced Settings] Page -[Alarm] Page
49
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
