Auto Trace
For setting Auto Trace. This item stores and
reproduces manual operation.
0
Click [Auto Trace] on the left side of the screen
to open the setting screen.
0
As Auto Trace performs simple saving of manual
operation, the position may be shifted during
playback.
0
Digital Flip in [Auto Flip] cannot be used during
Auto Trace recording.
.
State
0
[Record Start]:
The camera will start recording of Pan/Tilt and
Zoom operations. (for approximately 30
seconds)
0
[Record Stop]:
Click this when a recording operation is
complete.
Memo :
0
For details on the manual operation, see [PTZ
Control].
9
[State] Display
The current status is displayed.
0
Standby:
The camera is on standby. [Record Stop] is
invalid.
0
Recording:
The camera is recording. Click [Record Stop] to
finish recording. “Completed” will be displayed.
0
Completed:
Recording is completed. After “Completed” is
displayed for three seconds, “Standby” will be
displayed.
0
Timeout:
30 seconds has passed since recording started.
(Operation for the 30 seconds has been
recorded.) After “Timeout” is displayed for three
seconds, “Standby” will be displayed.
0
Memory Full:
The operation has exceeded the number of
recordable operations. Further recording
cannot be made even if it is within 30 seconds.
(Operations before the limit are recorded.) After
“Memory Full” is displayed for three seconds,
“Standby” will be displayed.
80
[Control] - [PTZ Settings]
Operation
