7
English
Getting Started
Connecting Audio/Video Components
Turn off all the components and the unit before connection.
TV connection
■
About connecting cords
A
B
C
Composite video cord (supplied)
S-video cord (not supplied)
Component video cord (not supplied)
• You can use composite video cord (
A
) and/or S-video cord
(
B
) for connecting DBS tuner and VCR to this unit.
• You can use component video cord (
C
) in addition to
A
and
B
for connecting your TV to this unit.
• By using
B
or
C
, you can get a better picture quality—in the
order:
A
<
B
<
C
.
• To view the picture from DBS tuner or VCR on your TV, connect
your TV to this unit using the same type of cord for connecting
DBS tuner or VCR to this unit.
• To view the picture from the built-in DVD player, connect the TV
to this unit using
A
,
B
, and/or
C
, then register the video
output mode correctly (see “Video output mode” on page 22).
• To enjoy the progressive video picture, connect the TV
compatible with the progressive video input using
C
, then
change the scanning mode correctly (see “Changing the
Scanning Mode” on page 14).
You can enjoy the progressive scanning mode only when
the color system of your TV is NTSC (see page 8).
For video connections
The S-video cords and the component video cord are not supplied with this unit.
Use the cords supplied with the other components or purchase them at your dealer.
For audio connections
Connect the external components to this unit with the audio cords.
Use the cord supplied with the other components or purchase them at your dealer.
• When the unit is shipped from the factory, the DIGITAL IN
terminals are set for use with the following components:
– DIGITAL 1 (coaxial): For DBS tuner
– DIGITAL 2 (optical): For TV
• If you connect CDR, change the digital input (DIGITAL IN)
terminal setting (see “Digital input (DIGITAL IN) terminals” on
page 21) and the source name (see “Changing the Source
Name” on page 12) correctly.
• Select the digital input mode correctly (see “Selecting the
Analog or Digital Input Mode” on page 13).
Audio cord (not supplied)
Optical digital cord (not supplied)
Digital coaxial cord (not supplied)
A
B
C
Yellow
Green
Blue
Red
White
Red
■
Setting the color system
This unit is compatible with both the PAL system and the NTSC
system. To match the color system of your TV, you can change the
color system of this unit by switching the VIDEO OUT SELECT on
the rear.
Set the color system of this unit while the unit is
turned off.
• Before you play back a disc, make sure that the
color system of the disc matches your TV.
VIDEO OUT SELECT
PAL
NTSC
Notes:
• If you change the VIDEO OUT SELECT setting while the unit is
turned on, the setting will not take effect until you turn on the unit
again.
• When you use a multi color system TV, you can change the color
system of this unit automatically by selecting “MULTI” options as
the monitor type in the PICTURE menu (see page 49). In this case,
the setting of this unit is changed to match the color system of the
loaded disc regardless the VIDEO OUT SELECT setting.
EN01_10RX-DV3SL[UG]2.pm5
02.8.8, 2:21 PM
7
