62
English
Operating Other Manufacturers’ Equipment
Manufactures’ codes for DBS tuner
Manufacturer
Codes
JVC
56, 57
*
, 67
Amstrad
43 – 49
Blaupunkt
30
Echostar
50, 51, 67
General Instrument
29
Goldstar
31
Grundig
32, 33
Hamlin/Re
01 – 05
Hirshmann
48, 52 – 55
Instrument
68
Itt/Nokia
34
Jerrold/G
06 – 14
Kathrein
52, 58 – 63
NEC
35, 36
Oak
15 – 17
Orbitech
48
Panasonic
18 – 20
Philips
37, 38
Pioneer
21, 22
RCA
65
Samsung
39, 40
Schwaiger
61, 64
Scientiff
23 – 25
Siemens
41, 42
Sony
66
Technisat
48
Tocom
26
Zenith
27, 28
7
To change the transmittable signals for
operating other manufacturers’ DBS tuner
1. Press and hold
STANDBY/ON DBS.
2. Press DBS.
3. Enter the manufacturer’s code
using the number buttons (1–9,
0).
See to the right to find the code.
4. Release
STANDBY/ON DBS.
You can turn on and off the DBS tuner:
STANDBY/ON DBS :
Turns on or off the DBS tuner.
After pressing DBS, you can perform the following operations
on a DBS tuner:
TV/DBS CH + or – :
Changes the channels.
1 – 9, 0, 100+
:
Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after selecting a
channel number.
Note:
• Refer also to the manual supplied with your DBS tuner.
5. Try to operate your DBS tuner by pressing
STANDBY/ON DBS.
When your DBS tuner turns on or off, you have entered the
correct code.
If there are more than one code listed for your brand of DBS
tuner,
try each one until the correct one is entered.
*“57” is the initial JVC code.
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
VCR
DBS
TV
AUDIO
STANDBY/ON
VCR
DBS
DVD
TAPE
TV
CDR
FM/AM
2
3
1
5
6
4
8
9
7
10/
0
+10
100+
EFFECT
TEST
SURR ON/OFF
SURR MODE
–
SUBWOOFER
+
CENTER
REAR·L
REAR·R
EN57-68RX-DV3SL[UG]2.pm5
02.8.8, 2:22 PM
62