JVC GY-HM180E, Инструкция по эксплуатации

Страница: 46 / 194

1 Press the [REC] button to start recording to
the SD card.
This camera recorder has two [REC] buttons.
Any of the [REC] buttons can be used to start/
stop recording by default.
The tally lamp lights up in red during recording.
0 Zoom Operation
(
A
P50 [Zoom Operation] )
0
Adjusting the Focus
(
A
P51 [Focus Operation] )
Memo :
0
If both the slots are loaded with recordable cards
in the factory default, pressing the [REC] button
starts recording only to the media in the selected
slot.
When [Main Menu]
B
[System]
B
[Record Set]
B
[Slot Mode] is set to “Dual”, recording can be
performed simultaneously to the cards in both
the slots.
(
A
P75 [Dual Rec] )
0
The tally lamp can be turned off in [System]
B
[Tally Lamp].
(
A
P116 [ Tally Lamp ] )
2 Check the most recently captured images.
0
Press the [C.REVIEW/4] button to activate
the Clip Review function. The most recently
captured images are played back on the LCD
monitor and viewfinder screen.
0
After playback, the camera recorder returns
to standby mode (STBY).
(
A
P73 [Viewing Recorded Videos
Immediately (Clip Review)] )
Memo :
0 [Clip Review] is assigned to the [C.REVIEW/4]
button in factory default.
0
[Clip Review] can also be assigned to other user
buttons.
(
A
P39 [Assignment of Functions to User
Buttons] )
Selecting System
Definition, File Format and
Video Format
You can select the definition of the recorded videos
(4K, HD, SD, Web or High-Speed), file format for
recording/playback, and the video recording
format on this camera recorder.
Setting the Record Format Menu
1
Set [System], [Format], [Resolution],
[Frame Rate] and [Bit Rate] in [Main Menu]
B
[System]
B
[Record Set]
B
[Record
Format].
2
Set each of the items.
A
[Selecting a System Definition] (
A
P 47)
B
[Selecting a File Format] (
A
P 48)
C
[Selecting a Video Format] (
A
P 48)
D
[Selecting the Aspect Ratio of SD Videos]
(
A
P 49)
3
After setting is complete for all items, press
the [LOLUX/3] button.
0
The recording format is switched.
0
A “Please Wait...” message appears on the
screen during switching.
Selecting a System Definition
The following definitions are available for selection.
0
4K:
Records in 4K resolution (3840x2160)
0
HD:
Records in HD (High Definition) resolution
(1920x1080 or 1280x720)
0
SD:
Records in SD (Standard Definition) resolution
(720x480 or 720x576)
0
Web:
Records in resolution (1440x1080, 960x540,
720x480, 720x576, or 480x270) suitable for web
distribution
0
High-Speed:
Records in HD resolution (1920×1080)
You can select a definition for the recorded images
from the following items under [System].
0
4K:
Records in 4K quality for both slots A and B.
0
HD:
Records in HD quality for both slots A and B.
0
SD:
Records in SD quality for both slots A and B.
0
HD+Web:
Records in HD quality for slot A, and Web quality
for slot B.
(
A
P75 [Recording Simultaneously at Two
Different Definitions] )
0
High-Speed:
Records in HD quality for both slots A and B.
Basic Shooting Procedures
47
Sh
ooting