JVA ZLM1, Руководство пользователя, Страница: 22 / 52

Con
tr
olling y
our ZLM1
Page 22 © JVA Technologies Pty. Ltd. www.jva-fence.com
8 CONTROLLING YOUR ZLM1
• Your JVA ZLM1 security low voltage monitor has been designed for
ease of operation. The ZLM1 may be armed and disarmed using any
of the following:
• Key switch or remote switch connected to the control input (IN1)
• Remote control radio receiver connected to IN1
•
Z Series Keypad (4 Line, LCD or Touch)
• JVA Webserver *not all versions
• JVA GSM module *not all versions
• PC or Smart Phone running JVA Cloud Router. *need internet
• Windows PC running JVA Perimeter Patrol
•
Low level interface (wired to control inputs and relay outputs) from a
third part security alarm panel or Physical Security Information System
(PSIM)
Note: More than 1 method may be used in the one installation.
8.1 CONTROL ARBITRATION
If an installation contains two ways to control the ZLM1, then the most re -
cent control signal will determine the Armed/Disarmed state. For example
if the ZLM1 is armed via the keypad and then disarmed at the control input
(IN1) it will disarm.
The higher level control methods such as the Webserver, GSM and PC
control software may override the Control input and Keypads methods,
depending on the options used. If you need to make sure that fence is dis -
armed (for maintenance) then using the keypad alone may not guarantee
that the fence will remain disarmed.
8.2 PC CONTROL
A standard Windows PC may be used to control and monitor a group of Z-
Series energisers as well as other JVA equipment. Ask your JVA installer for
a demonstration of Perimeter Patrol ™ software.
8.3 MOBILE & PC CONTROL (INTERNET ONLY)
Any smart phone, Apple or Windows PC may be used to control and moni -