JVA ZLM1, Руководство пользователя

Страница: 23 / 52

Page 23
Con
tr
olling y
our ZLM1
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM1 Manual
tor a group of Z-Series energisers as well as other JVA equipment. Ask yout
JVA installer for a demonstration of Cloud Router or visit www.cloudrouter.
pakton.net
8.4 WEB SERVER
Another alternative to remotely controlling JVA Z-Series energisers is to
use the PAE225 Webserver. When suitable configured this allows the ener -
giser to be controlled and monitored via a web browser from any internet
connected device anywhere in the world.
Note: The ZLM1 is not supported by older versions of the webserver.
8.5 KEYPAD
The ZLM1 and other devices connected on the same keypad bus can be
controlled via a keypad. For more information see “8.6 Controlling the
ZLM1 using the Keypad” on page 23.
8.6 CONTROLLING THE ZLM1 USING THE KEYPAD
The low voltage monitor can be installed in a convenient location close to
the fence, while the keypad can be positioned in an easily accessible place.
The systems status information, e.g. mains power, energiser on/off, fence
voltages, fence alarm, auxiliary alarm, etc., are displayed on the keypad. If
a keypad is connected, the control input terminal may not be operational
as they may have been disconnected by the installer. For a full description
of operating the Keypad see the keypads manual.
This keypad requires a Wi-Fi or GSM Gateway.
8.6.1 Keypad Versions
The current version keypad is a PTE0210 with code version 2.00. Older ver -
sions have limitations. The keypad version can be seen by pressing *9#.
PTE0210 Shows “PTE0210” and the code version.
• Can show fence voltages
•
Will respond to *68# to analyse the “group”.
• Version 1.21 and below
•
Older version, can be upgraded to V2.00 firmware.
• Cannot detect or operate with the ZLM1.
• Version 2.20 and higher