JVA ZLM1, Руководство пользователя

Страница: 7 / 52

Page 7
Q
uick S
tar
t G
uide (ST097)
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM1 Manual
1.3 WIRING UP YOUR ZLM1
This is covered under “10 Wiring Diagrams” on page 34. After the ZLM1
has been wired up you can begin to protect your perimeter.
1.4 JUMPERS
Jumpers quickly allow you to turn on and off different features, or reset the
device to defaults. These are explained in the table below.
JUMPER FUNCTION PURPOSE
J2 E12V on the
common pin of the
relay output.
If you wish to add a siren to the re -
lay that needs to be driven by 12V,
add the jumper to J2
J3 N/A N/A
J4 Factory default
jumper
Off to return pro -
grammable options
to factory defaults
on power up.
If the energiser needs to be
defaulted to factory settings,
remove all power (battery) and
remove the J4 jumper. Reapply
the battery power. Reapply the J4
jumper and the Energiser will be
reset to default settings.
J8 Inhibit internal
Beeper
Fitted to inhibit the internal
beeper, irrespective of any option
setting.