26
Cooking time
The oven allows you to set the cooking time for each type of
food. The oven switches off automatically when the cooking
time has elapsed. This avoids interrupting other tasks to switch
the oven off or exceeding the cooking time by mistake.
Example in the picture: Cooking time: 45 minutes.
1.
Select the type of heating using the function control knob.
2.
Press the
0
sensor twice.
The display panel will show
‹‹
:
‹‹
and the cooking time
symbol
x
.
3.
Programme the cooking time using the
@
or
A
sensors.
Sensor suggested value
@
= 30 minutes.
Sensor suggested value
A
= 10 minutes.
4.
Press the
p
sensor.
Set the temperature or required grill power using the
@
or
A
sensors.
The oven will switch on after a few seconds. The programmed
temperature will be shown on the display panel and the
x
symbol will light up.
The cooking time has finished
A signal will sound. The oven will stop heating. The display
panel will show
‹‹
:
‹‹
. Press the
0
sensor twice . A new
cooking time can be set with the sensors
@
or
A
. Or pressing
the
0
sensor and turning the control knob to zero. The oven is
off.
Changing the cooking time
Press the
0
sensor twice. Change the cooking time using the
@
or
A
sensors.
Cancelling the cooking time
Press the
0
sensor twice. Reset the cooking time to
‹‹
:
‹‹
with the sensor
A
. The time has been cancelled.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer
V
, the cooking time
x
, the end time
y
or
the time
0
, press the
0
sensor repeatedly until the required
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
End time
The oven allows you to set the time when you want the food
ready. In this case the oven switches on automatically and
switches off at the set time. For example, the food may be
placed in the oven in the morning and the oven set so that it is
ready at midday.
Ensure that the food will not go off if it is in the oven for too
long.
Example in the picture: It is now 10:30 AM, the cooking time is
45 minutes and the oven should switch off at 12:30 PM.
1.
Set the function control knob.
2.
Press the
0
sensor twice.
3.
Programme the cooking time using the
@
or
A
sensors.
4.
Press the
0
sensor.
The time when the dish will be ready and the end time
symbol
y
will be shown on the display panel.
5.
Delay the end time using the
@
or
A
sensors.
6.
Press the
p
sensor.
Set the temperature or required grill power using the
@
or
A
sensors.
The programmed temperature and the
y
symbol will be shown
on the display panel, and the oven will be set to standby. When
the oven turns on, the programmed temperature and the
x
symbol will be shown. The
y
symbol turns off.
The cooking time has finished
A signal will sound. The oven will stop heating. The display
panel will show
‹‹
:
‹‹
. Press the
0
sensor twice . A new
cooking time can be set with the sensors
@
or
A
. Or pressing
the
0
sensor and turning the control knob to zero. The oven is
off.
Changing the end time
Press the sensor
0
three times. Change the end time using
the
@
or
A
sensors. The altered time is shown after a few
seconds. Do not change the end time if the cooking time has
already started to count down. The final result may not be the
same.
Cancelling the end time
Press the
0
sensor three times and reset the end time to the
current time with the
A
sensor. The oven switches on.
