25
Programming the oven
There are different ways to programme the oven. Programming
the type of heating, temperature or grill power. The oven can be
programmed with the cooking time (duration) and the end time
for each dish. For more information, see the chapter
Setting the
time functions
.
Note:
We recommend preheating the oven before inserting the
food in order to avoid condensation on the oven glass.
Type of heating and temperature
Example in the picture: top and bottom heat
%
at 190 °C
1.
Select the type of heating using the function control knob.
2.
Set the temperature or required grill power using the
@
or
A
sensors.
The oven will begin to heat up.
Switching the oven off
Set the function control knob to the zero setting.
Changing the settings
The type of heating and the temperature or grill power may be
changed at any time.
Rapid heating
With the rapid heating setting, the oven reaches the
programmed temperature very quickly.
Rapid heating must be used for temperatures of more than
100 ºC.
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
1.
Select rapid heating
J
using the function control knob.
2.
Select the required temperature using the
@
and
A
sensors.
The
s
symbol lights up on the display panel. The oven will begin
to heat up.
End of rapid heating
A signal will sound, the
s
symbol will go out. Place the food in
the oven and select the required function and temperature.
Cancelling rapid heating
Set the function control knob to the zero setting. The oven
switches off.
Note:
With the rapid heating function you cannot programme
the cooking time duration.
Setting the time functions
This oven has various time functions. The
0
sensor activates
the menu and moves through the different functions. The time
symbols remain lit up while settings are programmed. A time
function that has already been programmed can be modified
with the
@
or
A
sensors.
Timer
The timer works independently of the oven. The timer has its
own signal. You can therefore distinguish whether the time set
for the timer or the automatic oven shut-off have finished
(cooking time).
1.
Press the
0
sensor.
The
V
symbol lights up on the display panel.
2.
Programme the timer using the
@
or
A
sensors.
Sensor suggested value
@
= 10 minutes.
Sensor suggested value
A
= 5 minutes.
The programmed time is shown after a few seconds. The time
set for the timer starts to count down. The
V
symbol lights up
on the display panel and the time elapsed is displayed.
The time set for the timer has elapsed
A signal will sound. The display panel will show
‹‹
:
‹‹
. Switch
off the timer using the
0
sensor.
Changing the time set on the timer.
Change the time set for the timer using the
@
or
A
sensors.
The altered time is shown after a few seconds.
Cancelling the timer
When the oven switches off, the timer continues working.
Resetting the timer to
‹‹
:
‹‹
with the
A
sensor. The timer
switches off.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer
V
, the cooking time
x
, the end time
y
or
the time
0
, press the
0
sensor repeatedly until the required
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
