Juniper MX10008, Руководство по оборудованию

Страница: 124 / 361

MX10008 Alarm and Management Cable
Specifications and Pinouts
IN THIS SECTION
Console Port Connector Pinouts for an MX10008 Router | 125
USB Port Specifications for the MX10008 Router | 126
Management Port Connector Pinouts for the MX10008 Router | 127
Console Port Connector Pinouts for an MX10008 Router
The console port (labeled CON) on the RCB panel is an RS-232 serial interface that uses an RJ-45 connector
to connect to a console management device. The default baud rate for the console port is 9600 baud.
Table 48 on page 125 provides the pinout information for the RJ-45 console connector. An RJ-45 cable
and RJ-45 to DB-9 adapter are supplied with the MX10008.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you want to connect
your laptop or PC directly to an MX10008 router, use a combination of the RJ-45 cable and RJ-45
to DB-9 adapter supplied with the device and a USB to DB-9 male adapter. You must provide the
USB to DB-9 male adapter.
Table 48: Console Port Connector Pinouts for the MX10008 Router
Description Signal Pin
Request to send RTS Output 1
Data terminal ready
Time of day for Precision Time Protocol
(PTP). You can use DTR pins as a TOD
universal asynchronous
receiver/transmitter (UART) by using
breakout cables.
DTR Output
TOD Output for PTP applications
2
125