Juniper MX10008, Руководство по оборудованию

Страница: 118 / 361

Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion | 120
Calculating the Fiber-Optic Cable Power Budget for an MX10008 Router | 122
Calculating the Fiber-Optic Cable Power Margin for an MX10008 Router | 123
MX10008 Optical Transceiver and Cable Support
The MX10008 router has eight slots for the line cards that can support a maximum of 1152 ports as
10-Gigabit Ethernet ports, 288 ports as 40-Gigabit Ethernet ports, or 240 ports as 100-Gigabit Ethernet
ports. Each of the network ports on the port panel supports quad small form-factor pluggable plus (QSFP+)
transceivers and QSFP28 transceivers.
The network ports on the MX10008 support QSFP+ and QSFP28 transceivers.
You can find information about the pluggable transceivers supported on your Juniper Networks device
by using the Hardware Compatibility Tool. In addition to transceiver and connector type, the optical and
cable characteristics—where applicable—are documented for each transceiver. The Hardware Compatibility
Tool enables you to search by product, displaying all the transceivers supported on that device, or category,
by interface speed or type. The list of supported transceivers for the MX10008 is located at
https://pathfinder.juniper.net/hct/product/#prd=MX10008 .
CAUTION: If you face a problem running a Juniper Networks device that uses a third-party
optic or cable, the Juniper Networks Technical Assistance Center (JTAC) can help you
diagnose the source of the problem. Your JTAC engineer might recommend that you
check the third-party optic or cable and potentially replace it with an equivalent Juniper
Networks optic or cable that is qualified for the device.
SEE ALSO
Supported Transceivers
119