Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 84 / 156

CHAPTER 3 Media Flow Manager Web-Based Interface Media Flow Manager Administrator’s Guide
84 Service Director Copyright © 2010, Juniper Networks, Inc.
Optional Security Configuration
Set authentication parameters for configured Matching URL Hosts.
See
Figure 76 , below, for graphic.
•
Matching URL Host
—Pick a configured host from the drop-down list.
•
Hash Verify’s Shared Secret
—Enter the shared secret needed for authentication.
•
Allowed Time Deviation
— Allowed deviation of current time from the request timestamp.
Default value is 10 seconds.
•
Cache Age Response
—Allows the Service Director to set a maximum age in the HTTP
response it sends, to allow the browser to cache. The default value is 1 day (86400
seconds). A value of 0 indicates that the response should be made non-cacheable.
Click
Add
to complete the security configuration and
Save
at the top of the page to make
changes persistent across reboots.
Figure 76 Service Director > Configure Page Detail (Optional Security Configuration)
Match to Response Configuration
For each configured host (choose from drop-down list), set a match type and either a
configured Preset XML Response file (choose from drop-down list), or up to three hosts, to
handle the response. See
Figure 77 , next, for graphic.
•
Matching URL Host
—Pick a configured host from the drop-down list.
•
Match Type
and
Match String
—Choose a type from the drop-down list and enter a value
for it, then choose a response; either
Preset XML Response
or
Host to Respond
(next).
•
Preset XML Response
and
Preset XML Response Reference Name
—Select the radio-
button and choose a configured file reference name from the drop-down list.
•
Host to Respond
and
Host 1
,
Host 2
, and
Host 3
—Select the radio-button and enter up
to three hostnames.
Click
Add
to complete the Match to Response configuration and
Save
at the top of the page to
make changes persistent across reboots.