Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 109 / 156

cmc 109
Media Flow Manager Administrator’s Guide CHAPTER 5 CLI Commands
cmc rendezvous
Configure Central Management Console rendezvous options.
cmc rendezvous
server
accept {client <client> | all}
auth default
authtype
password username <name> password [<password>]
ssh-dsa2 | ssh-rsa2 username <name> identity <identity>
auto-accept
enable
service-name <name>
Notes:
•
server
—Set CMC server rendezvous options:
•
accept client
or
all
—Accept or reject a single client in the tentative list, or all of
them. The <client> is the IP address of the client, though the hostname is also
provided in the online help listing all of the options. (The IP address is used because it
is guaranteed to be unique in the listing. There could be multiple records with the
same hostname, although we'd rather this not happen.) Accepting the client adds its
configuration to the CMC appliance list. Rejecting the client removes it from the
tentative list.
•
auth default
—Specify what authentication method, and specific pieces of
information needed by that method, to use to log into clients that announce
themselves using the rendezvous mechanism. All of this data is copied into the
appliance record when the appliance is accepted.
•
authtype
—Enter either password to use configured password authentication,
ssh-dsa2 to use configured ssh-dsa2 authentication, or ssh-rsa2 to use
configured ssh-rsa2 authentication.
•
password
—Choose to authenticate with a
password
and
username
; if the
positive form of the
password password
command is used with no password,
the user is prompted for the password. Any entries made at this prompt only echo
with the asterisk (*) character, and the user has to enter the same string twice for
confirmation.
•
ssh-dsa2
—Choose to authenticate with ssh-dsa2; enter the
identity
and
username
needed.
•
ssh-rsa2
—Choose to authenticate with ssh-rsa2; enter the
identity
and
username
needed.
•
auto-accept
—On a CMC server, enable or disable automatic acceptance of CMC
clients who present themselves for management. The clients still have to log into the
server before they can be eligible. If this is disabled, the administrator must approve
each client before it will be added to configuration
•
enable
—If the system is a CMC server, whether or not it accepts rendezvous
requests by clients. This does not mean that the clients will be automatically accepted
for management; only that we will listen to them at all.
•
service-name
—Set or clear the service name which is used for CMC rendezvous.