Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 85 / 156

Service Director 85
Media Flow Manager Administrator’s Guide CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 77 Service Director > Configure Page Detail (Match Response Configuration)
Manage Service Director
Activate
,
Deactivate
, or
Remove
entirely a configured
Matching URL Host
chosen from the
drop-down list.
See
Figure 78 , below, for graphic. Click
Save
at the top of the page to make changes
persistent across reboots.
Figure 78 Service Director > Configure Page Detail (Manage Service Director)
Service Director’s crossdomain XML Configuration
A crossdomain file is required to be returned to flash players. You can configure the
crossdomain file in one of two ways:
•
Use the following preset XML Response
—Select this radio-button and choose a
configured XML response file from the drop-down list.
•
Configure through Domain Names
and
Domain 1
,
Domain 2
, and
Domain 3
—Select
this radio-button and enter up to three domain names. The names are automatically
added to the crossdomain.xml file in the system.
•
Restore Factory Default crossdomain.xml
—You can also reset your crossdomain file to
its system factory state by selecting this radio-button.
Click
Apply
to immediately apply changes; click
Save
at the top of the page to make changes
persistent across reboots.