Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 132 / 156

CHAPTER 5 CLI Commands Media Flow Manager Administrator’s Guide
132 reload Copyright © 2010, Juniper Networks, Inc.
Notes:
•
host
—Configure hosts to receive RADIUS authentication requests; overrides the set
global defaults for all RADIUS hosts. Use
no radius host <IP_address>
to delete all
RADIUS-specific settings for this host. To refine which host is deleted, use
no radius
host <IP_address> auth-port <port>
. RADIUS hosts are tried in the order they are set.
•
auth-port
—Set a port for RADIUS; default is
1812
. You can use the same IP
address in more than one
radius host
as long as the
auth-port
for each is different. A
UDP port number, specify
auth-port
immediately after the
host
option (if present).
•
key | prompt-key
—For this host, set or clear, (with
no
) a shared secret text
string
or choose
prompt-key
and the user is prompted for the key; entries echo the asterisk
(*) character, for greater security. If no
key
is set, the user is prompted for the key.
Mutually exclusive with
prompt-key
argument.
•
login-lat-group
—For this host, set or clear (with
no
), the string that identifies the
groups that the user is authorized to use when Login-service is defined as LAT (local
area transport). If none is set, the user is prompted for the string; entries echo the
asterisk (*) character, and the user must enter the same string.
•
retransmit
—For this host, set or reset to zero (with
no
), the number of times the
client attempts to authenticate with any RADIUS server. Range is
0-5
, default is
1
. To
disable retransmissions set it to
0
(zero).
•
timeout
—For this host, set or reset default (with
no
), the timeout for retransmitting a
request to any RADIUS server. Range is
1-60
, default is
3
.
•
key
—Set or clear (with
no
) a global shared secret text string (key) used to communicate
with any RADIUS host. If no key is set, the user is prompted for the key. Entries made at
this prompt echo the asterisk (*) character, and the user must enter the same string twice.
•
login-lat-group
—Set or clear (with
no
), a global shared secret text string (key) used to
communicate with any RADIUS server. If no key is set, the user is prompted for the key;
entries echo the asterisk (*) character, and the user must enter the same string twice.
•
retransmit
—Set or reset to zero (with
no
), a (global) number of times the client attempts
to authenticate with any RADIUS server. Default is
1
. To disable retransmissions set it to
0
(zero). Range is
0-5
.
•
timeout
—Set or reset to default (with
no
), the (global) timeout for retransmitting a
request to any RADIUS server. Default is
3
. Sets . Range is
1-60
.
show radius
RADIUS settings.
reload
Reboot or shut down the system.
reload
force
halt [noconfirm]
noconfirm