Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 49 / 156

System Config 49
Media Flow Manager Administrator’s Guide CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 24 System Config > Users Page Detail (User Accounts)
Select a user account and
Remove
,
Enable
, and/or
Disable
it. Click
Save
at the top of the
page to make changes persistent across reboots.
Add New User
On the
System Config > User
page, add a new user to Media Flow Manager. See Figure 25.
•
User
—Login name.
•
Full YPName
—Displays in User Accounts list.
•
Capability
— There are three pre-defined capabilities:
•
admin
—Full privileges (default); in
Enable
mode all
EXEC
commands are available.
•
monitor
—Privileges for reading all data and performing all actions, but not for
changing any configuration.
•
unpriv
—Unprivileged.
Click
Add User
to complete operation. Click
Save
at the top of the page to make changes
persistent across reboots.
Figure 25 System Config > Users Page Detail (Add New User)
Change Password
For each user,
admin
,
cmcclient
,
cmcrendv
, and
monitor
are default users, set or change
the password. May be left empty if no password is required.
Click
Save
at the top of the page to make changes persistent across reboots.