Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 71 / 156

CMC Setup 71
Media Flow Manager Administrator’s Guide CHAPTER 3 Media Flow Manager Web-Based Interface
CMC Setup > Groups
Once you’ve added the Media Flow Controllers that you want to manage, you can group them
logically. A group can be treated acted on as an individual appliance.
See
Figure 60 , next, for graphic. For CLI details, see
cmc auth
. To add a CMC group:
1. Enter a
Group Name
and
Comment
(optional) and click
Add Group
. A new page area
displays for the just-added group with checkboxes for each managed node.
2. Select each node that you want to include in the group and click
Apply
. To remove a node,
simply un-check its checkbox and click
Apply
again.
3. Click
Save
at the top of the page to make changes persistent across reboots.
Group all, Group <n>
Group
all
is a special group containing all available Media Flow Controllers. Beneath it are
configured groups.
Click
Apply
to complete the adding a Comment,
Cancel
to revert to existing configuration,
and
Remove group
(not available for default
all
group) to delete a group. Click
Save
at the
top of the page to make changes persistent across reboots.
Figure 60 CMC Setup > Groups Page Detail
CMC Setup > Identities
Use this page to create Media Flow Manager identities for authentication with ssh-dsa2 or ssh-
rsa2. See
Figure 61 for graphic. See
cmc auth
for CLI details on the options.