Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 73 / 156

CMC Setup 73
Media Flow Manager Administrator’s Guide CHAPTER 3 Media Flow Manager Web-Based Interface
CMC Setup > Rendezvous
Rendezvous is the mechanism by which Media Flow Controllers connect to a CMC for
management. This page lets you set parameters for Media Flow Controllers to connect
automatically. See
Figure 62 , next, for graphic.
The
CMC Setup > Rendezvous
page lets you tell CMC to accept clients who request
management. In order for this option to work, you must enable CMC rendezvous on the client
(managed node or node-to-be-managed) first. This can be included in a
Profile
you create.
For Media Flow Controller details, see “Configuring CMC (Central Management Console)
Options” on page 70 of the
Media Flow Controller Administrator’s Guide and CLI Command
Reference
.
1. Once your nodes have been configured to rendezvous with your CMC server, enable
automatic rendezvous by selecting the
Accept new clients automatically
checkbox and
clicking
Apply
. All appliances that have been configured to rendezvous with this CMC
server display in the
Rendezvous Requests Pending
table.
2. Use the buttons to act on the pending rendezvous requests:
•
Refresh Listing
—Update the display with latest information.
•
Accept Selected
—The selected pending rendezvous are accepted and cleared from
the pending list.
•
Accept All
—All pending rendezvous are accepted and the list is cleared.
•
Reject Selected
—Pending rendezvous are rejected and cleared from the list.
•
Reject All
—All pending rendezvous are rejected and the list is cleared.
3. Click
Save
at the top of the page to make changes persistent across reboots.
Figure 62 CMC Setup > Rendezvous Page Detail