Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Руководство администратора

Страница: 81 / 156

Preset Profiles 81
Media Flow Manager Administrator’s Guide CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 72 Preset Profiles > Audit Nodes Page Detail
Preset Profiles > Preset Config
For the selected Media Flow Controller or group, you can verify a Preset Config.
Apply Probe
Setup a probe namespace that can be used by probes, such as load-balancer probes, to
check the health of nodes. When a node or group is selected and the
Apply Probe
button is
pressed, Media Flow Manager creates a namespace on the node(s) with (name)
generic_probe
, (uri-prefix)
/probe
, (domain)
any
, and the Media Flow Manager as the
origin-
server
. This namespace cannot be deleted.
There is a pre-loaded object (
probe.dat
) in the Media Flow Manager that can be requested of
a Media Flow Controller via the probe namespace. Media Flow Controller fetches the object
from the Media Flow Manager as origin and delivers it, thereby confirming the whole service
path is working. The probe request must be of this form:
http://<media flow controller>/probe/probe.dat
Select a Media Flow Controller node or group and click
Apply Probe
. See Figure 73 for
graphic. The
Probe Profile Information
area displays your probe configuration.