Juniper JRR200, Руководство по оборудованию

Страница: 25 / 108

Table 10: AC Power Supply Specifications (continued)
Specification Item
440 W Maximum System Power Requirement
1500 BTU/Hour System Thermal Output = (Maximum System
Power Requirement ) * 3.41
Note: 1 W = 3.41 BTU/Hour
JRR200 Route Reflector AC Power Cord Specifications
A detachable AC power cord is supplied with the AC power supplies. The coupler is type
C13 as described by International Electrotechnical Commission (IEC) standard 60320.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical code
(NEC) Section 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3).
Table 11 on page 25 provides power cord specifications, and Figure 8 on page 25 depicts
the plug on the AC power cord provided for each country or region.
Table 11: AC Power Cord Specifications
Plug Standards Electrical Specification Country
AS/NZ 3112-1993 250 VAC, 10 A, 50 Hz Australia
GB2099.1 1996 and
GB 1002 1996
(CH1-10P) 250 VAC, 10 A, 50 Hz China
CEE (7) VII 250 VAC, 10 A, 50 Hz Europe (except Italy and United Kingdom)
CEI 23-16/VII 250 VAC, 10 A, 50 Hz Italy
JIS 8303 125 VAC, 12 A, 50 or 60 Hz Japan
NEMA 5-15 125 VAC, 10 A, 60 Hz North America
BS 1363A 250 VAC, 10 A, 50 Hz United Kingdom
Figure 8: AC Plug Types
25 Copyright © 2018, Juniper Networks, Inc.
Chapter 1: Overview