Juniper JRR200, Руководство по оборудованию

Страница: 24 / 108

Table 9: AC Power Supply Unit LEDs
Description State Color LED
Indicates one of the following:
• Power input voltage is not within the normal
operating range.
• No power input.
Off Unlit AC
Input power present and is within the normal
operating range. Steady Green
No DC power output or abnormal DC output. Off Unlit DC
DC power output is within the normal operating
range. On steadily Green
Power supply unit failure. On steadily Amber ! (Fault)
Invalid power supply unit. Blinking
Power supply unit is functioning normally. Off Unlit
NOTE:
•
If both the AC LED and the DC LED are unlit, either the AC power cord is
not installed properly or the power supply unit fuse has failed.
• If the AC LED is lit and the DC LED is unlit, the AC power supply unit is
installed properly, but the power supply unit has an internal failure.
JRR200 Route Reflector AC Power Supply Specifications
Table 10 on page 24 lists the specifications for an AC power supply.
Table 10: AC Power Supply Specifications
Specification Item
Operating range:
• Low-voltage line—100–127 VAC
• High-voltage line—200–240 VAC
AC input voltage
50–60 Hz AC input line frequency
• Low-voltage line—4 A
• High-voltage line—2 A
AC input current rating
• Low-voltage line—650 W
•
High-voltage line—650 W
AC output power
Copyright © 2018, Juniper Networks, Inc. 24
JRR200 Route Reflector Hardware Guide