Jungheinrich EKS 410, Руководство по эксплуатации

Страница: 52 / 99

E 15
0
206
.GB
Inductive automatic steering takes over
the steering of the truck and applies it to
the guidance wire.
Tracking is complete once the truck has
been led precisely to the guidance wire.
“Tracking on” (41) changes to “guidance
wire applied” (42). The tracking signal is
no longer sounded. The track is now
automatically guided.
Z
Travel and hydraulic operations can only
be activated in the narrow aisle with two-handed operation.
Grab the hand rest in the traction
controller and hydraulic controller
handle (7) (two-handed operation). Turn
the travel selection switch (13) to
change travel speed and direction.
Press the push button (34) to quit the
guidance wire. The display (38) changes
to non-active mode. In addition, the
”guidance wire applied” (42) display
changes to the steering angle display
(25).
Diagonal travel
Z
Diagonal travel is only possible if the truck is wire or rail guided.
Diagonal travel is possible (simultaneous travelling and lifting / lowering) when both
control switches (8 and 13) are pressed.
F
You can only change from automatic to manual steering once the truck has fully left
the narrow aisle.
42 38
13 7 8
25
34
38
E 15
0
206
.GB
Inductive automatic steering takes over
the steering of the truck and applies it to
the guidance wire.
Tracking is complete once the truck has
been led precisely to the guidance wire.
“Tracking on” (41) changes to “guidance
wire applied” (42). The tracking signal is
no longer sounded. The track is now
automatically guided.
Z
Travel and hydraulic operations can only
be activated in the narrow aisle with two-handed operation.
Grab the hand rest in the traction
controller and hydraulic controller
handle (7) (two-handed operation). Turn
the travel selection switch (13) to
change travel speed and direction.
Press the push button (34) to quit the
guidance wire. The display (38) changes
to non-active mode. In addition, the
”guidance wire applied” (42) display
changes to the steering angle display
(25).
Diagonal travel
Z
Diagonal travel is only possible if the truck is wire or rail guided.
Diagonal travel is possible (simultaneous travelling and lifting / lowering) when both
control switches (8 and 13) are pressed.
F
You can only change from automatic to manual steering once the truck has fully left
the narrow aisle.
42 38
13 7 8
25
34
38