Jungheinrich EKS 410, Руководство по эксплуатации

Страница: 36 / 99

D 7
1
004
.GB
5 Battery – checking condition and acid level
– The battery manufacturer’s maintenance instructions apply.
– Check the battery housing for cracks and any spilled acid.
– Remove any oxydation remains from the battery terminals and apply an acid-free
grease to the battery terminals.
– Unscrew the stops and check the acid level.
The acid level should be at least 10-15 mm above the top of the plates.
– If necessary, re-charge the battery.
6 Battery discharge indicator
When you turn the EMERGENCY
DISCONNECT switch and turn the key
in the key switch clockwise, the battery
discharge indicator will show the
residual capacity available. The display
flashes at a residual capacity of 30%. Lift
cut-out occurs at a 20% capacity
display.
For maintenance-free and special
batteries the display and cutout points
can be adjusted by authorised personnel
by assigning parameters.
+ -
50%
D 7
1
004
.GB
5 Battery – checking condition and acid level
– The battery manufacturer’s maintenance instructions apply.
– Check the battery housing for cracks and any spilled acid.
– Remove any oxydation remains from the battery terminals and apply an acid-free
grease to the battery terminals.
– Unscrew the stops and check the acid level.
The acid level should be at least 10-15 mm above the top of the plates.
– If necessary, re-charge the battery.
6 Battery discharge indicator
When you turn the EMERGENCY
DISCONNECT switch and turn the key
in the key switch clockwise, the battery
discharge indicator will show the
residual capacity available. The display
flashes at a residual capacity of 30%. Lift
cut-out occurs at a 20% capacity
display.
For maintenance-free and special
batteries the display and cutout points
can be adjusted by authorised personnel
by assigning parameters.
+ -
50%