Jungheinrich EKS 410, Руководство по эксплуатации

Страница: 60 / 99

E 23
0
206
.GB
5.3 Exiting the driver's cab with the emergency abseil device
Industrial trucks with a height-adjustable operator position which can exceed 3m from
the ground, have an emergency lowering mechanism and an emergency abseil
device for the driver which he can use if the operator position ever becomes stuck.
Z
If the driver’s cab cannot be lowered due to a fault, not even with the emergency
lowering (see “Driver’s Cab / Aux. Lift Emergency Lowering” section), the operator
must exit the driver's cab via the emergency abseil device.
The driver must be instructed in how to use the emergency abseil device. To exit the
cabin with the emergency abseil device, proceed as follows:
– Turn the key switch (2) to “0”.
– Press the EMERGENCY DISCONNECT switch (18).
– Remove the abseil device (50) on the
EKS 410 from the compartment under the seat.
on the EKS 513-515 from the compartment in the overhead guard.
– Attach the karabiner hook (53) of the abseil device (left or right) to the eye (49) of
the overhead guard.
– Throw out the rope without knots, the rope must pass over fixed objects. Do not
pass the rope over sharp edges.
– Fit the safety belt or slings in accordance with the accompanying operating
instructions or as instructed.
– Attach the eye of the safety belt to the karabiner hook (54) of the abseil device (50).
51 50 52
53 54
49
18
2
E 23
0
206
.GB
5.3 Exiting the driver's cab with the emergency abseil device
Industrial trucks with a height-adjustable operator position which can exceed 3m from
the ground, have an emergency lowering mechanism and an emergency abseil
device for the driver which he can use if the operator position ever becomes stuck.
Z
If the driver’s cab cannot be lowered due to a fault, not even with the emergency
lowering (see “Driver’s Cab / Aux. Lift Emergency Lowering” section), the operator
must exit the driver's cab via the emergency abseil device.
The driver must be instructed in how to use the emergency abseil device. To exit the
cabin with the emergency abseil device, proceed as follows:
– Turn the key switch (2) to “0”.
– Press the EMERGENCY DISCONNECT switch (18).
– Remove the abseil device (50) on the
EKS 410 from the compartment under the seat.
on the EKS 513-515 from the compartment in the overhead guard.
– Attach the karabiner hook (53) of the abseil device (left or right) to the eye (49) of
the overhead guard.
– Throw out the rope without knots, the rope must pass over fixed objects. Do not
pass the rope over sharp edges.
– Fit the safety belt or slings in accordance with the accompanying operating
instructions or as instructed.
– Attach the eye of the safety belt to the karabiner hook (54) of the abseil device (50).
51 50 52
53 54
49
18
2