0
206
.GB
E 10
4
Industrial truck operation
4.1
Safety regulations for truck operation
Travel routes and work areas:
Only use lanes and routes specifically designated for
truck traffic. Unauthorised persons must stay away from work areas. Loads must only
be stored in places specially designated for this purpose.
Driving conduct:
The driver must adapt the travel speed to local conditions. The
truck must be driven at slow speed when negotiating bends or narrow passageways,
when passing through swing doors and at blind spots. The driver must always
observe an adequate braking distance between the forklift truck and the vehicle in
front and must be in control of the truck at all times. Abrupt stopping (except in
emergencies), rapid U turns and overtaking at dangerous or blind spots are not
permitted. It is forbidden to lean out of or reach beyond the working and operating
area.
Visibility when travelling outside the narrow aisle:
The driver must look in the
direction of travel and must always have a clear view of the route ahead. When
carrying loads which affect visibility, these must be stored at the rear of the truck. If
this is not possible, a second person must walk in front of the truck as a lookout.
M
Negotiating slopes and inclines:
It is forbidden to negotiate slopes and inclines.
M
Negotiating docks:
It is forbidden to negotiate docks.
Negotiating lifts:
Lifts may only be negotiated if they have sufficient capacity, are
suitable for driving on and authorised for truck traffic by the owner. The driver must
satisfy himself of the above before entering these areas. The truck must enter lifts
with the load in front and must take up a position which does not allow it to come into
contact with the walls of the lift shaft.
Persons riding in the lift with the forklift truck must only enter the lift after the truck has
come to a rest and must leave the lift before the truck.
Type of loads to be carried:
The operator must make sure that the load is in a
satisfactory condition. Do not carry loads unless they are positioned safely and
carefully. Use suitable precautions to prevent parts of the load from tipping or falling
down.
0
206
.GB
E 10
4
Industrial truck operation
4.1
Safety regulations for truck operation
Travel routes and work areas:
Only use lanes and routes specifically designated for
truck traffic. Unauthorised persons must stay away from work areas. Loads must only
be stored in places specially designated for this purpose.
Driving conduct:
The driver must adapt the travel speed to local conditions. The
truck must be driven at slow speed when negotiating bends or narrow passageways,
when passing through swing doors and at blind spots. The driver must always
observe an adequate braking distance between the forklift truck and the vehicle in
front and must be in control of the truck at all times. Abrupt stopping (except in
emergencies), rapid U turns and overtaking at dangerous or blind spots are not
permitted. It is forbidden to lean out of or reach beyond the working and operating
area.
Visibility when travelling outside the narrow aisle:
The driver must look in the
direction of travel and must always have a clear view of the route ahead. When
carrying loads which affect visibility, these must be stored at the rear of the truck. If
this is not possible, a second person must walk in front of the truck as a lookout.
M
Negotiating slopes and inclines:
It is forbidden to negotiate slopes and inclines.
M
Negotiating docks:
It is forbidden to negotiate docks.
Negotiating lifts:
Lifts may only be negotiated if they have sufficient capacity, are
suitable for driving on and authorised for truck traffic by the owner. The driver must
satisfy himself of the above before entering these areas. The truck must enter lifts
with the load in front and must take up a position which does not allow it to come into
contact with the walls of the lift shaft.
Persons riding in the lift with the forklift truck must only enter the lift after the truck has
come to a rest and must leave the lift before the truck.
Type of loads to be carried:
The operator must make sure that the load is in a
satisfactory condition. Do not carry loads unless they are positioned safely and
carefully. Use suitable precautions to prevent parts of the load from tipping or falling
down.
Содержание EKS 410
