Jungheinrich DFG 316s Скачать руководство пользователя

Страница: 41 / 187

05.10 EN

Adding diesel

CAUTION!

Air in the fuel system will result in malfunctions.

Never allow the fuel tank to run dry.

2.1

Fuelling

WARNING!

Diesel fuel can be hazardous

Diesel fuel can cause irritation if it comes into contact with the skin. Rinse any
affected areas thoroughly.

If it comes into contact with the eyes rinse them immediately with flowing water and
call for a doctor.

Wear safety gloves when handling diesel fuels.

NOTE

Fuelling must always be performed in designated areas by trained and
authorised personnel.

NOTE

Capacity: DFG 316s/320s = 50 l.

Use only DIN EN 590 diesel with a certain rating above 51.

2.1.1 Fuelling the tank system

Procedure

• Park the truck securely before fuelling,

(see "Parking the truck securely" on
page 76)

• Unscrew the tank cap (51).
• Insert the tap into the open tank filler

neck.

• Add the fuel.
• Do not overfill the tank.
• Tighten the cap (51) back on after

fuelling.

Fuelling is now complete.

Содержание DFG 316s




























































































































































































Результаты поиска

Содержание DFG 316s

Отзывы:

Похожие инструкции для DFG 316s

Бренды по названию

Популярные бренды

Jungheinrich DFG 316s, Руководство по эксплуатации

Результаты поиска

Содержание DFG 316s

Отзывы:

Похожие инструкции для DFG 316s

Бренды по названию

Популярные бренды