Jungheinrich DFG 316s Скачать руководство пользователя

Страница: 178 / 187

179

05.10 EN

6.9

Starter battery

Checking the battery condition, acid level* and acid density*

*not for maintenance-free batteries

CAUTION!

Battery acid can be dangerous

Battery acid is highly corrosive.

Therefore it is essential to avoid contact with battery acid.

If clothing, skin or eyes have nevertheless come into contact with battery acid,
immediately rinse the affected parts with water.

If the eyes have been affected, immediately seek medical attention.

Neutralise spilled battery acid immediately.

Check battery

Procedure

• Check the battery housing for cracks and any spilled acid. Remove any oxidisation

remains from the battery terminals. Lubricate the battery terminals with an acid-free
grease. Check the acid level.

The acid should lie between the top and bottom markings.

Checking the acid density

Procedure

• Clean the area around the inspection plugs. If necessary, add distilled water to the

top mark. Check the acid density.

If the battery is charged sufficiently, the acid density should be 1.24 to 1.28 kg/l.

• Recharge the battery if necessary. Fit the drain plug back on.

Battery disposal

Batteries may only be disposed of in accordance with national environmental
protection regulations or disposal laws. The manufacturer’s disposal instructions
must be followed.

Содержание DFG 316s




























































































































































































Результаты поиска

Содержание DFG 316s

Отзывы:

Похожие инструкции для DFG 316s

Бренды по названию

Популярные бренды

Jungheinrich DFG 316s, Руководство по эксплуатации

Результаты поиска

Содержание DFG 316s

Отзывы:

Похожие инструкции для DFG 316s

Бренды по названию

Популярные бренды