05.10 EN
170
Check the cooler and fan and clean if necessary
Procedure
• Remove minor contamination from the fan grille (219) with weak suctioned air.
CAUTION!
Risk of incorrect disassembly/assembly of fan unit
X
Only trained personnel may remove major cooler contamination.
• Remove the four mounting screws (220) and washers and place the fan unit to the
front.
Z
Take care not to bend or strain the fan unit hydraulic hoses in the process.
• Remove any contamination from the radiator and fan with weak suctioned air.
• Take care not to damage the cooler plates and the fan blades.
CAUTION!
A damaged cooler and fan can be dangerous
X
Check the radiator and fan for damage.
X
If the radiator or fan are damaged, only start to use the truck when the damage has
been rectified.
Fan unit assembly
Procedure
• Mount the fan unit to its intended place with
the four mounting screws.
Z
Make sure that the fan unit is installed
centrally.
DANGER!
A broken fan can be dangerous
X
Using a suitable tool check and make
sure that the fan can move freely.
X
The fan must not touch the deflector.
X
Only start the engine when the engine
cover is closed.
6.7.9 Replace air filter cartridge
DANGER!
A running engine can be dangerous
X
Carry out all maintenance work with the engine switched off.
X
Do not start the engine if the air filter cartridge is removed.
219
220
220
220
220
Содержание DFG 316s
