Jungheinrich DFG 316s Скачать руководство пользователя страница 99

Страница: 99 / 187

05.10 EN

100

4.16 Assembly and hydraulic ports of additional attachments

WARNING!

Incorrectly connected attachments can cause accidents.

Attachments with incorrectly connected hydraulic attachments can result in
accidents.

Attachments must only be assembled and commissioned by trained, specialist
personnel.

Note the attachment manufacturer’s operating instructions.

Before commissioning, check the fasteners are positioned correctly and securely
and make sure they are complete.

Before commissioning, make sure the attachment is working correctly.

Hydraulic ports

Requirements

– Non-pressurised hydraulic ports.
– The exchange ports on the truck are marked ZH2 and ZH3.
– Attachment directions of movement defined to match the controls’ direction of

movement.

Procedure

• Non-pressurised hydraulic hoses

• Switch off the truck and wait a few minutes.

• Attach the plug connector and engage it in position.
• Mark the controls with symbols that indicate their function.

The attachment is now hydraulically connected.

WARNING!

Hydraulic ports for clamping attachments

Clamping attachments may only be added to trucks which have a button to enable
additional hydraulic functions.

On trucks with auxiliary hydraulics ZH2 the clamping function should only be
attached to the coupling pair marked ZH2.

On trucks with auxiliary hydraulics ZH3 the clamping function should only be
attached to the coupling pair marked ZH3.

Содержание DFG 316s




























































































































































































Результаты поиска

Содержание DFG 316s

Отзывы:

Бренды по названию

Популярные бренды

Jungheinrich DFG 316s, Руководство по эксплуатации

Результаты поиска

Содержание DFG 316s

Отзывы:

Бренды по названию

Популярные бренды