Jungheinrich DFG 316s, Руководство по эксплуатации

Страница: 104 / 187

105
05.10 EN
6.1.2 Drive Control
This option restricts the travel speed of the truck irrespective of the steer angle.
Beyond a factory set lift height (approx. 1.50m) the maximum speed is restricted to
walking pace (approx. 3 km/h) and the slow travel indicator is activated. When the
mast drops below this height again, the travel speed picks up at reduced acceleration
level to the speed set by the accelerator pedal to prevent unexpected sudden
acceleration when changing from slow travel to normal travel. Normal acceleration is
then only activated again when the speed set by the accelerator pedal is achieved or
if the accelerator pedal is set to the 0 position.
Z
In addition to the daily checks before starting, (see "Checks and operations to be
performed before starting daily operation" on page 61) the driver must carry out the
following checks:
– Lift the empty load handler beyond the reference lift height and check if the slow
travel display lights up.
6.1.3 Lift Control
This option includes Drive Control and also monitors and controls the mast functions.
Tilt speed reduction as a function of the lift height (from approx. 1.5 m lift height).
– If the load handler is lowered below the limit height, the tilt speed increases up to
the level specified by the control lever.
Optional:
– Tilt angle display.
In addition to the daily checks before starting, the driver must carry out the
following checks:
Procedure
• Lift the empty load handler beyond the reference lift height and check if the slow
travel display lights up and the tilt speed is clearly reduced.
• Steering at idle: check if the steering wheel display is working.
• Check the tilt angle display by tilting forward and back.