Jungheinrich DFG 316s Скачать руководство пользователя страница 34

Страница: 34 / 187

05.10 EN

2.3

Loading with another industrial truck

WARNING!

The truck can be damaged

The truck to be loaded can get damaged when loading with another industrial truck.

Only trained specialist personnel should load the truck.

Use only trucks with sufficient capacity for loading.

Only for loading and unloading.

The forks of the second industrial truck must be sufficiently long

Transporting over long distances prohibited.

Loading the truck with a second industrial truck

Requirements

– Park the truck securely, Siehe “Parking the truck securely” auf Seite 76.

Procedure

• Raise the truck with the forks at the side between the axles.
• Raise the truck slightly and make sure it is securely positioned on the forks. If

necessary adjust or secure the forks with stops.

• Carefully load/unload the truck, (see "Lifting, transporting and depositing loads" on

page 85).

• Lower the truck slowly onto the ground and prevent it from rolling away.

The truck is now loaded.

Содержание DFG 316s




























































































































































































Результаты поиска

Содержание DFG 316s

Отзывы:

Бренды по названию

Популярные бренды

Jungheinrich DFG 316s, Руководство по эксплуатации

Результаты поиска

Содержание DFG 316s

Отзывы:

Бренды по названию

Популярные бренды