Jungheinrich DFG 316s Скачать руководство пользователя

Страница: 38 / 187

05.10 EN

D Fuelling the Truck

General

1.1

Safety regulations for handling diesel fuel and LPG

WARNING!

An unsecured truck can cause accidents

The truck can suddenly start to move.

Before filling up or replacing the LPG bottle, park the truck securely, Siehe “Parking
the truck securely” auf Seite 76.

WARNING!

Accident risk from ignition

Fuels and liquefied petroleum gas can ignite.

Smoking, naked flames and other ignition sources are strictly prohibited in the
immediate vicinity when handling fuels and LPG.

Labels indicating the hazard are must be positioned where they are clearly visible.

Do not store flammable materials in this area.

Powder fire extinguisher must be provided within easy reach of the filling area.

Use only category A, B or C type powder fire extinguishers to fight LPG fires.

Bring any unsealed LPG bottles immediately outside, attach visible markings and
notify the supplier.

Storage and Transport

The diesel and LPG storage and transport devices must comply with statutory
requirements.

If there is no filling point available, the fuel must be stored and transported in clean,
approved containers.

The contents must be clearly indicated on the container.

Содержание DFG 316s




























































































































































































Результаты поиска

Содержание DFG 316s

Отзывы:

Похожие инструкции для DFG 316s

Бренды по названию

Популярные бренды

Jungheinrich DFG 316s, Руководство по эксплуатации

Результаты поиска

Содержание DFG 316s

Отзывы:

Похожие инструкции для DFG 316s

Бренды по названию

Популярные бренды