Jung WLAN-AC-POE-UAE, Продуктовая документация

Страница: 17 / 51

17
WLAN Access Point · Configuration
N
-
• Hold the reset magnet at the side of the reed contact (N) for more than 2 seconds
and
less than 5 seconds
on the WLAN Access Point to trigger the reed contact.
- The start of the reset is confirmed by a flashing of the WLAN LED.
Reset to factory settings
• Hold the reset magnet at the side of the reed contact (N) for
more than 5 seconds
and
less than 10 seconds
on the WLAN Access Point to trigger the reed contact.
- The start of the reset is confirmed by a flashing (orange) of the WLAN LED.
Note:
The respective position
for the placement of
the reed contact may
vary depending on the
device type.
If the position is
known, the reset can
also be done without
removing the design
cover!