Jung WLAN-AC-POE-UAE, Продуктовая документация

Страница: 31 / 51

31
WLAN Access Point · Advanced functions
Advanced functions
Remote control (possible from Firmware 4.x)
From version 4.x, it is possible to centrally configure other networked WLAN Access Points.
• Call up the corresponding window via
Services > Remote Control.
• Click on the green command field
Scan
- All connected WLAN Access Points (from V 4.x) are listed with IP address, SSID
etc.
• Click on the respective command field Edit to configure the device.
• Set the device in the sub-items ‘System Properties’, ‘Network Settings’,
‘WLAN Settings’ according to your preferences.
- To visually check whether you have selected the ‘correct’ device, temporarily
change the status of the LED via the corresponding tick (S) and confirm this with
the command field
Submit.
Once you have configured a device, the list of other devices is shown. Devices previously
set by you are not displayed in the list for the time being.
• To reconfigure these devices, click again on the
Scan
command field.
The accessibility to groupings and authorizations for the remote control by means of master
and access key is set in the section ‘Key management.
• Switch to the corresponding window via Services > Remote Control > Keys .
- A visualization of the keys is not allowed here according to GDPR.
Note:
To clearly identify the
devices, use the MAC
address that you find
on the back of the
devices and that you
should note down.
In delivery condition,
you will also find them
on the label.
S