Jung WLAN-AC-POE-UAE, Продуктовая документация

Страница: 13 / 51

13
WLAN Access Point · Configuration
Status information
Status > Overview shows the current values of the system and which devices are connect-
ed to the WLAN Access Point.
The System sub-item displays the following information:
-
Mode:
The standard setting is Access point
- Firmware version: The current version is 5.x.x.x
For information on updates see page 14 et seq.
In the Wireless sub-item, further details are displayed – especially
- the signal quality (87 % in the figure) and the channel (i.e. channel 11).
In the sub-item
Registered stations
, you will find the following details
• about SSID, MAC and IP address (also see page 48)
• about useful and interference signal (noise)
• about transfer rates and channel bandwidth (20 / 40 MHz)
A signal power of 20 % should not be underrun to ensure secure data transmission to the
relevant device.
Overview in the network
For a further overview, all devices are listed in Network > IP Configuration under the inter-
faces sub-item.
The following actions are available to you:
• Connect: enables the relevant interface
• Stop: disables the relevant interface
•
Edit:
allows the configuration of the relevant interface
• Delete: deletes the relevant interface
• Add new interface: adds another interface
The interface symbols in the left field at the bottom ( I ) mean:
- Copper cable connection
- Front connection (RJ45 front socket)
- WLAN
If one of the symbols is missing, the corresponding interface is not available or deleted.
Note:
Due to the operating
system, the first station
may be displayed twi-
ce. This is not an error!
Note:
The functionality of the
Expert Diagrams is
described on page 35.
Note:
The changes made
here can lead to exten-
sive changes in the
device function and
should only be perfor-
med if you are certain!
After modification, the
device may not be
accessible via this
interface!
I