Jung WLAN-AC-POE-UAE, Продуктовая документация

Страница: 46 / 51

46
WLAN Access Point · Annex
• Change from the category DHCP to the category
Static
- The values for IP address and subnet mask must be entered manually in the emp-
ty fields.
-
IP address:
The first 3 blocks must be 192.168.0.x. The last position must not be
0, 5 or less than 256 and must not be assigned twice in the network!
- Subnet Mask: 255.255.255.0
• Exit the dialogue box by clicking on the WLAN button at the top centre to return to
the list of WLAN (wireless) networks.
- If the settings are correct, the connection to the WLAN Access Point is now
established! This is indicated by a check mark in front of the entry ‘Jung’.
• Open the Safari browser of your iPhone / iPad and enter the address of the
WLAN Access Point in the address bar! In delivery condition, this is: 192.168.0.5
- You will receive a security prompt, which is, however, due to technical conditions,
because the WLAN Access Point is ‘just’ a device (see also page 10).
• Click Continue to access the web interface of the WLAN Access Point.
- You are now on the user interface of the WLAN Access Point, which you can con-
figure according to your wishes after entering the password (in the delivery status,
this is admin).