JUMO dTRANS T06 Ex, Руководство по эксплуатации

Страница: 21 / 124

4 Electrical connection 21
4.2 Connection diagram
The connection is made via screw terminals that have slot cod-
ing.
Note: Please ensure that any terminals that were removed for
wiring purposes or to replace the device, are reconnected at the
correct position.
Conductor Admissible cross section
Rigid or flexible 0.2 to 2.5 mm
2
Flexible with ferrule with or
without plastic sleeve 0.25 to 2.5 mm
2
AWG 12 to 24
2 rigid/flexible conductors
with equal cross section 0.2 to 1 mm
2
2 flexible conductors with
equal cross section, ferrule
without plastic sleeve 0.25 to 1 mm
2
2 flexible conductors with
equal cross section, ferrule
with plastic sleeve 0.5 to 1.5 mm
2
AWG according to UL/CUL 12 to 30
Tightening torque of screws: max. 0.6 Nm