JUMO digiLine CR HT10, Руководство по эксплуатации, Страница: 79 / 84

79
15 Technical data
15 Technical data
15.1 IO-Link interface
15.2 Analog inputs (sensor connection side)
Input for temperaure sensor
Input for CR conductivity sensor
Communication interface IO-Link device V 1.1 (downward compatible to V 1.0)
Communication mode (data transfer rate) COM 3 (230.4 kBaud)
IO Device Description (IODD) The IODD can be localized via the "IODDfinder" on the
JUMO website in the product area for this device or at
www.io-link.com and downloaded.
Max. cable length acc. to IO-Link standard 20 m
Output mode
Switching output type Transistor switching output can be configured as NPN, PNP
or Push/Pull
short-circuit proof Yes (clocked)
resistant to overload Yes
protected against polarity reversal Yes
Ampacity of the switching outputs 100 mA in each case
Voltage drop of the switching outputs max. 2 V in each case
Measuring range
Pt100 -50 to +250 °C
Pt1000 -50 to +250 °C
Connection types 2-wire/3-wire
Measuring accuracy ±0.25 % of MR
a
Ambient temperature influence 0.1 % / K
Period 500 ms
a
MR: measuring range span
Units µS/cm
mS/cm
kΩ × cm
MΩ × cm
Display ranges
a
0.000 to 9.999
00.00 to 99.99
000.0 to 999.9
0000 to 9999
Temperature compensation TC linear
b
for -50 to +100 °C and over 0.045 µS/cm
TC curve
b
for -20 to +150 °C and over 0.055 µS/cm
TDS
c
for -50 to +250 °C
Natural water DIN EN 27888 for 0 to 36 °C
Natural water with expanded range for 0 to 100 °C
ASTM D1125-95 neutral impurities for
0 to 100 °C and over 0.045 µS/cm
ASTM D1125-95 alkali and acid impurities for
0 to 100 °C and over 0.055 µS/cm