JUMO digiLine CR HT10, Руководство по эксплуатации, Страница: 15 / 84

15
3 Device Description
Sensor stress
To assess the stress on the sensor from the thermal, the current "sensor stress" is calculated on the ba-
sis of the measurement data provided by the sensor. In the JUMO digiLine electronic components, a sen-
sor stress alarm signal can be configured. If a critical sensor stress level is reached, this signals a sensor
stress alarm on the master device and, where available, on the display of the JUMO digiLine electronic
components.
JUMO Digital Sensor Management Software for the PC
The JUMO DSM software (DSM stands for D igital S ensor M anagement) can be used to manage, cali-
brate, and test JUMO digiLine electronics on the PC. In addition, it serves as a configuration tool for the
JUMO digiLine electronics. The connection to the PC is made via the USB interface. The JUMO DSM
software adds data from the memory of JUMO digiLine electronics to its sensor database. The sensor
database holds calibration logbook entries, histories about replaced sensors and configuration changes
to the JUMO digiLine electronics. If the JUMO digiLine electronics are to be connected to a new sensor
(device versions with a separate sensor only), data for the new sensor can be reset via the JUMO DSM
software and the information from the old sensor archived on the PC.