JJ-CCR ApS 2017
www.JJ-CCR.com
2017 JJ-CCR ApS – 2.00 / Revision 06
43
6.6
The main display
The controller is equipped with a large display, which presents all of the requisite information for the diver
in a clear and comprehensible format.
The display is divided into 3 rows. The “Top Row” shows depth, time and
deco stops. The “Center Row” shows the PPO2 and the “Bottom Row”
the current mode, gas and deco Info. The “Bottom Row” is also used to
show additional information (6.22 Info Screens). The critical information
contained on the Top and Center Rows is always available during a dive.
3 metres per minute
12 metres per minute
6 metres per minute
15 metres per minute
18 metres per minute
With more than 18m/min the
entire block will flash
red
.
9 metres per minute
The data or information displayed in this example comprises:
• The current depth of 39.7 metres. If a
red
flashing ”
0
” is displayed in place of the current depth then
the pressure sensor is defective or requires a service.
• An ascending speed of 6 metres per minutes. A maximum of 6 blocks are shown and each block
displayed stands for an ascending speed of 3 metres per minute:
• The running progress bar beneath ”TIME” is a second counter. 60 seconds are shown. Each letter of
the word ”TIME” corresponds with approx. 15 seconds.
15 seconds
30 seconds
45 seconds
60 seconds
