JJ-CCR ApS 2017
www.JJ-CCR.com
2017 JJ-CCR ApS – 2.00 / Revision 06
70
6.20.7
Last Stop
(Deco Setup)
6.20.8
NDL Display
(Deco Setup)
Now the high gradient factor is set (visible
at the ”GF Hi” display). Only one digit of
thenumber is changed at a time. The ten’s
are always set first. Pressing the left button
”Change” results in the displayed digit being
increased by 1. After the digit has reached
9 it will revert back to 0 again. Pressing the
right button ”Next” once takes the diver to-
the units digit.
By pressing the right button ”Save” the current settings are saved and edit mode is exited, and the user
switches to the next entry. The current entry is marked with a ”
u
“.
Using this menu item it is possible to define
the depth of the last decompression stop. It
is possible to set the last decompression stop
at either 3 or 6 metres.
By pressing the right button ”Edit” the user accesses the edit mode. In order to change the settings it is
necessary to press the left button ”Change” until the desired option is displayed. By pressing the right
button ”Save” the current setting is saved and the user switches to the next entry. The current entry is
marked with a ”
u
“.
The NDL display options are identical to
those in the dive setup menu:
• NDL
• CEIL
• GF 99
• @+5
•
∆
+5
(See chapter: 6.16.6 for a more precise ex-
planation of the options).
By pressing the right button ”Edit” the user accesses the edit mode for the NDL display. In order to change
the settings it is necessary to press the left button ”Change” until the desired option is displayed. By
pressing the right button ”Save” the current setting issaved and the user switches to the next entry. The
current entry is marked with a "
u
“.
