![JJ-CCR CE Edition Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/jj-ccr/ce-edition/ce-edition_user-instructions_2018669015.webp)
JJ-CCR ApS 2017
www.JJ-CCR.com
2017 JJ-CCR ApS – 2.00 / Revision 06
15
4.3.1 Attaching the stand to the base unit
When attaching the stand it is first necessary
to insert the base plate into the base unit from
above. Before inserting the base plate it is nec-
essary to ensure that the sealing surfaces of the
base unit are clean. Carefully check the two base
plate O-rings and re-grease these if necessary.
When doing so, do not use excessive grease but
simply apply a light coating. It must be possible to
insert the base plate without applying force and
without excessive effort.
During the next step the four lock screws are in-
serted into the base plate. Afterwards, attach the
two blocks. An arrow is marked on the base unit
and a notch is visible on the block. These serve
to ensure the correct alignment of the stand. The
stand is now secured. Important: Do not tight-
en the four nuts yet because it is first necessary
to align the stand correctly. The stand is properly
aligned if the arrow on the base unit points pre-
cisely to the notch in the block. It is now possible
to tighten the self-locking nuts. The following im-
age shows the stand correctly attached.
All parts are shown once again here in overview.