JJ-CCR CE Edition Скачать руководство пользователя страница 9

Страница: 9 / 108

JJ-CCR ApS 2017

www.JJ-CCR.com

2017 JJ-CCR ApS – 2.00 / Revision 06

JJ-CCR overview

3.1

JJ-CCR Scope of functionality

• Highly robust aluminium housing to which it is possible to secure up to 4 diving tanks

(2 – 12 litre) using conventional tank belts.

• Self-filling soda lime canister (axial).

• Heavy duty stand.

• Integrated handle.

• Back-mounted counter lungs.

• Redundant power supply: One battery for the controller, one battery for the HUD and

two parallel batteries for the solenoid. None of the batteries are integrated into the
circuit.

• Integrated ADV (Automatic Diluent Valve).

• DSV (Dive Surface Valve).

• Manual supplemental O2 and diluent valves with the option of feeding in external

gases.

• Independent HUD (Head Up Display) with real-time display of PPO2 for all three oxygen

sensors.

• Reliable controller with an integrated multi-gas decompression computer (based on the

Shearwater Petrel 2).

Содержание CE Edition













































































































Результаты поиска

Содержание CE Edition

Отзывы:

Бренды по названию

Популярные бренды

JJ-CCR CE Edition, Инструкция пользователя

Результаты поиска

Содержание CE Edition

Отзывы:

Бренды по названию

Популярные бренды